Navy quilted low air loss mattress for a hospital bed, its pump hooked over the footboard
AirWave mattress on a hospital bed with its cover removed, showing the exposed 8" cells beside the pump
AirWave low air loss mattress in a bedroom, quilted cover on, pump at the bed end
Front of the AirWave pump, showing the dial marked soft, medium and firm and the hose ports
AirWave pump on a hospital bed footboard, held by its fold-back hooks, seen from above
Quilted cover of the AirWave mattress folded back, with the blue cells visible underneath
Adjustable strap and buckle holding the AirWave mattress base to the hospital bed frame
Red emergency deflate pull tag at the edge of the AirWave mattress
Hose connector on the AirWave mattress with the transport cap in place and its carry loop
Features graphic for the AirWave low air loss mattress for a hospital bed: replaceable cells, dial pump and transport mode

AirWave Low Air Loss Mattress for Hospital Bed, 450 lb, 36" x 80"

MSRP
$1,124
Our Price
$1,001
You save
$123 (11%)
Taxes and shipping calculated at checkout
Qualifies for free local delivery
SKU: AW7000
Size: Hospital 36" x 80"

Product variant with selected options does not exist!

Size: Hospital 36" x 80"

Stock Notification

Get notified when this product is available again

Description

Most people shopping for a low air loss mattress want the same few things: support that keeps changing where it presses, air moving softly beneath the cover to keep the top from feeling stuffy, a pump anyone can run, and a fit on the hospital bed. Maybe it's for your dad, back in his own room once the hospital lets him go, or for your partner, cared for at home through palliative care. If you're worried about bed sores, that's often why families start looking.

The AirWave is our 450 lb low air loss mattress: 100 lb more than our Oasis, and a rating you'd usually find on pricier cell-on-cell systems. When the bed has to move, transport mode keeps the cells full with the pump unplugged, and red and green lights show at a glance whether the pressure is right. The dial runs from soft through medium to firm, so whether your loved one sleeps on their back, side or stomach, you can set a feel that suits them.

Key features

  • 450 lb on a full 8" air surface. That's 100 lb more than our Oasis, on twenty replaceable 8" cells, without moving up to a cell-on-cell system.
  • A transport mode that holds the air. In transport mode, you can disconnect the pump for a move and the cells keep their air on the way.
  • Red and green pressure lights on the pump. A red light-emitting diode (LED) shows low pressure and a green LED shows normal pressure. The range on the knob runs from 20 to 60 millimetres of mercury (mmHg), starting 10 mmHg softer than our Oasis (30-60 mmHg).
  • An air mattress for a hospital bed, ready to run. It measures 36" x 80" x 8" and fastens to a 36" x 80" hospital bed with adjustable straps. The pump hooks over the footboard, and the hooks fold flat when they're not needed. A 15-foot cord can reach a wall outlet a few steps away.
  • A quilted cover and a UL mark. The fluid-resistant nylon polyurethane (PU) cover is quilted, closes with a covered zipper and can be replaced by itself. Each cell snaps in and out on its own. The system carries the Underwriters Laboratories (UL) mark and complies with UL 60601-1 and Canadian Standards Association (CSA) C22.2 No. 60601-1.

These 36" x 80" dimensions match our Full Electric Hospital Bed for Home Use and our Semi-Electric Hospital Bed for Home Use. For our lower-priced all-air mattress, see our Oasis 8" all-air mattress with pump.

Specifications

Type Alternating-pressure and low-air-loss replacement mattress
Size 36" wide x 80" long x 8" high, in the 36" x 80" hospital size
Air cells 20 replaceable snap-in cells, 8" tall; 17 alternate; 3 static cells at the pillow end; nine cells are vented to provide low air loss
Cycle time 10 minutes
Pressure settings Dial marked soft, medium and firm, 20 to 60 mmHg (millimetres of mercury)
Weight capacity 450 lb
Pump Included; 11" x 4" x 8", 5.7 lb; 8 litres per minute (LPM); a filter you can swap; hooks that fold flat
Pressure lights Red LED for low pressure; green LED for normal pressure
Transport mode Holds air in the cells during a move
Power 120 V / 60 Hz; 15-foot cord
Cover Quilted nylon polyurethane (PU), fluid-resistant, replaceable, with a covered zipper
Cell material Nylon and PVC
Base Mesh PVC with an anti-slip finish; straps that adjust to the rails and deck of the bed
Quick release Pull-strap deflate
Certification UL mark; complies with UL 60601-1 and CSA C22.2 No. 60601-1

FAQ

What are low air loss mattresses?

They use vented cells that release a little air beneath the cover. On the AirWave, 9 cells are vented, and they work alongside an alternating cycle.

What is the difference between a low air loss mattress and an alternating pressure mattress?

Alternating pressure is about movement: on the AirWave, 17 cells fill and ease on a 10-minute cycle. Low air loss is about airflow: 9 vented cells let a little air out beneath the cover. The AirWave gives you both, plus a 450 lb rating, transport mode and pressure lights. For both functions at a lower price, see our all-air Oasis.

Is a low air loss mattress the same as an air mattress?

Not really. A camping or guest air bed is a single chamber you inflate and leave. This low air loss mattress is a full replacement made for a hospital frame, with a pump, a moving cycle, and vented cells.

Are low air loss mattresses comfortable?

Comfort starts with the setting. The AirWave dial runs from soft at 20 mmHg to firm at 60 mmHg, so the surface can be set wherever it feels right to them. A quilted cover over the air cells adds a softer top.

What comes with this air mattress for a hospital bed?

The mattress and its pump come as one system. The pump has the soft, medium and firm dial, the red and green pressure lights, a filter you can change and a 15-foot cord. The mattress is 36" x 80" x 8", with adjustable straps that hold it to a 36" x 80" hospital bed. Care homes and nursing homes use the same size.

What happens when you unplug the pump to move the bed?

Use transport mode first. The cells keep their air while the pump is disconnected, so the surface is still full when you plug it back in. Once it is running again, the green light shows the pressure is back in range.

Make Direct Bed your last stop. Bring us any Quote from any Brand from any Store and we will beat it by 10%.

Save 25% Sitewide at Checkout

Fall Sale on Now

Save 50% to 75% on in-store inventory clearouts. 

*Some restrictions apply

Similar Products

Great minds shop alike! Discover the perfect pairings our customers are loving. These frequently purchased combos complete your set and unlock the ultimate experience for your new favorite item.

Browsing History

Can't remember which one you saw? Here is a list of your browsing history from Direct Bed.

Make Direct Bed your last stop. Bring us any Quote from any Brand from any Store and we will beat it by 10%.

Our Brands

Direct Bed is a multi-brand authorized dealer with a unique capability to compare all brands and get you the exact mattress you are looking for. If you've seen a great brand on your travels, come on in. We most likely have the model you are looking for. Our Product Selection covers over 5000+ Mattresses, Boxsprings, Beds Furniture and more.

But hey, who's counting...

32% Savings

Direct Bed Saves you 32% on average when comparing the equivalent name brand option to our name brand.

We are PROUDLY ...

100% Canadian

We only Show, Stock and Sell 100% Canadian Mattresses, Boxsprings, Bedframes and Custom Furniture.